The leading edge technology features a high flow rate of people through the gate with minimal alarms. Personal items such as coins keys, belt buckles can pass through the magnetic field without causing and alarm.

These walk through metal detectors have been selected by leading security agencies worldwide to protect high ranking government officials. It conforms to all International Security Standards and s capable of detecting both magnetic and non magnetic weapons.

Classic/Navy model is particularly suitable for environments with limited head room and features an electronic unit in an IP55 container.

Alarms

Visible Signals

• High intensity display
• Green and red signals
• Signal proportional to the mass of the object detected

Audible Signs

• High acoustic intensity alarm signal
• Volume and tome of alarm signal can be programmed
• Duration proportional to the size of the metal mass in transit.

Certification and Conformity

• Harmless to wearers of pacemakers of other vital support systems, pregnant women and magnetic storage media (floppy discs, audio cassettes and similar)
• Conforms to the FAA 3 gun test standard and to the NILECJ-0601-00 standards
• Complies with the currently applicable international standard on electrical safety and EMC and with the applicable CE regulations.

Installation Data

Power Supply

• 115 VAC (230 available upon request), +15/-25% 45 -65 HZ, 20 VA MAX

Temperature and Relative Humidity:

• From 5oF to 131oF
• From 0 to 95% (without condensation)

Accessories / Options

Steel stabilizer plates for portable applications
This accessory, which provides the necessary stability to the antennas, is used in portable applications where the ability to change the location of the walk-through metal detector is required.

External Main Battery & Supply Unit MBSU
including emergency battery
External Main Battery Supply unit, including two 12 Vdc 7Ah emergency batteries and a charger. Battery life (normal condition): 9h max. Recharging time: 7h at 50% of the full charge. Protection degree (lEG 529) : IP55

Personal Effect Depository

This article acts both as a spacer between the X-ray unit and the walk through metal detector and as a temporary depository for metal personal effects which are not of dubious nature and therefore not required to undergo X-ray analysis (coins, keys and so on). The base is constructed in material that guarantees maximum compatibility with the walk-through metal detector, and in such a way as not to transmit any mechanical shocks from the X-ray unit to the inspection gate.