FACT SHEET: GSM SOUND AND MOTION ACTIVATED (COVERT LISTENING) MONITORING SYSTEM
Specs.
- Dimensions: 2.36L x 1.5W x 0.7H inches or 60(L) X 40(W) X 20 (H)mm
Frequency: Tri-Band: 900/1800/1900
Power Supply: DC-6V
Built-in Battery: 3.7 Li Battery
Microphone Sensitivity: Approx. 10m
Sound Sensitivity Adjustment: 3 Levels
Call or Dial-out Number(s): 3
Remote Monitoring Distance: Unlimited
Method of Configuration: SMS Text Messages
Power Comsumption: 10mA
Working Current: 200mA
PIR Frequency: 870nm
PIR Detection Distance: 3m
Weight: 60g
-
Audio File: Overview:
Video File: Overview:
GSM Sound and Motion Activated (Covert Listening) Monitoring System or GSM-SAMS
(the size of a pack of cigarettes), is a revolutionary device incorporating the
latest in GSM technology, it can serve both as a sophisticated bugging (Covert Listening) device
while at the same time it can serve as an anti-intrusion or warning device. Upon
receiving sound or motion in the vicinity of the GSM-SAMS, utilizing its
built-in, sound-activated* microphone in conjunction with its cell phone module
with a SIM card loaded, an automatic / instantaneous reporting mechanism in
either form of text messaging or phone connection** to the pre-selected
number*** can be triggered allowing one person to become promptly notified of
any incidents / irregularities going on in the house, car or office, etc.
Alternatively one can make a direct phone call to the GSM-SAMS for covert listening if required.
Microphone sensitivity is adjustable for filtering out background noises under
most circumstances. (When tuned to the highest sensitivity level, any sound
within 10 meters from the device can be picked up.)
Up to 3 pre-selected numbers can be set up in a SIM card being loaded into GSM-SAMS.
Done by sending specially arranged text messages to GSM-SAMS from the
pre-selected number.
GSM-SAMS: Questions and Answers
Q : How much time to fully charge the batteries?
A : 2-3 Hours.
Q : Can the charger be used as a power supply as well?
A : Yes.
Q : Can you set the unit to activate/notify you on IR and sound detection at the same time?
A : Yes
Q : Does the unit keep the IR and Microphone settings when the unit is switched off and on again?
A : Yes..
.Q : Why is there a microphone input on the front and also on the back of the unit?
A : The mic. input on the front of the unit is designed to receive sound and the one on the back is the actual sound sensor or trigger.
Q : What does the "Green" flashing indicator represent?
A : When the unit is searching for a GSM signal it will flash often. However, when it finally finds a GSM signal and locks on it will flash slower, once every 3-4 seconds.
Q : What does the "Red" light on the far left-side represent?
A : When the units battery is fully charged the "Red" light on the far left-side will turn off.
Q : What is the purpose of the second and third numbers that you program into the memory?
A : Normally if you preset all three numbers inside, it will send a text message to the third one, and then to the second one, and then to the first number. If the first one doesn't get through it will go into voice mail on the first number, but it will never call the second and third one. (that's to say, the second and third number can only receive text messages, never get a telephone call)
Q : Can you set the unit so that it only sends a text message on activation/alert and switch off the telephone call option?
A : Please just set one phone number as the third number (no first and second numbers). The unit will only send text message to the third number, it will no longer have the telephone call option.
Q : Do the numbers remain in the unit if it is switched off and on again?
A : Yes.
Q : Do the numbers remain in the unit if the sim card is changed?
A : No.
Q : Once I program my cell phone number(s) into the unit will it
call me or can I call in directly to the GSM-SAMS to listen?
A : Both, you always have the option of calling in directly in
addition once you attach the motion-activated module to the unit it will call
you and allow you to monitor the GSM-SAMS once it has detected motion and/or
sound.
Q : How long can I monitor the GSM-SAMS?
A : Since you can plug the GSM-SAMS into an AC outlet there is
no limit to how long you may listen. However, when using the battery you'll get
up to 2-3 hours of continuous use.
Q : Are there any remote-control functions?
A : Yes, 1~6: (see above) are done through text messaging.
Trouble-shooting:
Make sure you've tested your sim card in an actual cell phone and it works. However, when you place that sim card in the sim card holder in this unit, Power Strip, Alarm Clock Radio,etc. and it doesn't seem to work. Please place the unit near an open window or door to make sure it tests out there ok first prior to placing it in the target location. Sometimes the signal doesn't quite reach the unit the same way cell phones signals work. So, you may need to try one or more different locations first. If possible, also try elevating the item off the floor to improve reception.
Note: Please send SMS ' 912 ' to the sim card to retrieve lost 3 digit pin code.
Note: It maybe necessary to place a small piece of paper in the sim-card holder along with the sim card in order to cause the sim's contacts to actually touch the copper contacts of the sim holder. Use this method after you've verified that the sim card is actually working by placing it in a cell phone and making or receiving a call on that same phone. Sometimes the sim cards contact aren't actually touching the sim holder contacts. |